Are you getting the Failed to update the World War 3 game error while trying to update the game? Here is a complete guide to fix the update error on World War 3 on your Windows PC. World War 3 is a free-to-play first-person shooter developed by The Farm 51. It is quite popular amongst millions of gaming enthusiasts. However, some gamers have complained of encountering an error while updating the game. When triggered, the user is prompted with the following error message:
Now, if you are one of the affected users who are experiencing the same error and are unable to update World War 3, this guide is for you. Here, we will be discussing different fixes that will help you get rid of the error. You can try these fixes and successfully install game updates for World War 3.
What causes the Failed to update the World War 3 game error?
Here are the potential causes of the Failed to update the World War 3 game error:
- It can be caused if you don’t have sufficient disk space to install the updates. If the scenario is applicable, free up the required disk space to fix the error.
- The error can also occur if you are missing the administrator rights to run the game launcher (Steam). Hence, launch Steam with admin access to fix the error.
- Another reason for the same error can be corrupted game files of World War 3 which is preventing the game from installing the updates. In that case, you can try verifying the integrity of game files to get rid of the error.
- It can also be caused due to your overprotective firewall which is blocking the game update process. So, you can try disabling or installing your firewall to fix the error.
Fix Failed to update the World War 3 game error
Here are the fixes that you can try if World War 3 fails to update on your PC:
- Make sure you have sufficient disk space.
- Launch Steam as an administrator.
- Install all pending Windows Updates.
- Verify the integrity of the game files.
- Temporarily disable your firewall.
- Reinstall World War 3.
1] Make sure you have sufficient disk space
You might be facing the issue at hand because there is no sufficient free disk space available on your system to install new game updates. If the scenario is applicable, you should check the disk partition where you have installed the game and try freeing up some disk space. A lot of gamers have recommended having at least 10 GB of free space to download and install game updates for World War 3.
Try using the Disk Cleanup Utility that helps you free up disk space. You can also use other different ways in order to clean up or free up disk space. Additionally, there are a lot of free junk cleaner software that help you clean up disk space and make some free space to download updates for your game.
After cleaning up disk space, reattempt to update the game and see if the problem is fixed or not. If you still get the same error, move on to the next potential fix to resolve the error.
2] Launch Steam as an administrator
If you have enough disk space and you are still getting the same error, the problem might be caused because of due administrator privilege to install game updates. If you are using Steam as the game launcher, it requires administrator rights to replace and update new files for the existing game installation. Hence, make sure you are running Steam with administrator access to avoid the Failed to update the World War 3 game error.
To run Steam as administrator, you can right-click on its executable icon and then select the Run as administrator option. If this fixes the error for you, you can make Steam launch with admin access always by following the below steps:
- Firstly, right-click on Steam’s executable icon.
- Now, from the appeared context menu, click on the Properties option.
- Next, navigate to the Compatibility tab and move down to the Settings section.
- After that, enable the checkbox associated with the option named Run this program as administrator.
- Finally, press the Apply > OK button to save changes.
Now, Steam will launch with administrator rights and hopefully, this will resolve the error for you. However, if it doesn’t, move on to the next potential solution to fix the Failed to update the World War 3 game error.
3] Install all pending Windows Updates
The error at hand might be triggered due to pending Windows Updates, especially .NET updates. In case the update is failed because of missing .NET dependency, you should be able to fix the error by installing all the pending updates including optional updates.
Now, to install pending Windows updates, press Win+I to open Settings and then go to the Windows Update tab. Then, tap on the Check for updates button and it will start fetching pending updates. You can later download and install all the updates. Additionally, you can also go to the Optional Updates section and install all the available updates.
After the installation of Windows updates, your PC will restart. On the next startup, try updating World War 3 and see if the error is resolved or not. If not, you can try the next potential fix to get rid of the error.
4] Verify the integrity of the game files
This error can be a result of corrupted, broken, or missing game files of World War 3. If you are dealing with faulty game files, you are likely to experience the Failed to update the World War 3 game error. Hence, if the scenario is applicable, you should be able to fix the error by performing an integrity check on World War 3’s game files.
Here are the steps that you can follow to verify the integrity of game files of World War 3:
- Firstly, launch the Steam client and log in with the account that has ownership of the World War 3 game.
- Now, go to the LIBRARY section and locate the World Wa 3 game.
- Next, right-click on World War 3’s game title, and from the context menu, select the Properties option.
- After that, navigate to the Local Files tab and tap on the Verify the integrity of game files button to start the game files’ verification process.
- When the verification is done, you can try updating the World War 3 game and then see if the error is fixed or not.
In case you still get the same error, there are a few more fixes you can try. So, move down to the next potential fix.
5] Temporarily disable your firewall
Another potential cause of the Failed to update the World War 3 game error can be the fact that the update process is interrupted by your overprotective firewall. If the scenario is applicable, you should be able to fix the error by disabling it while updating the game.
Another thing you can try is whitelisting the World War 3 executable through your firewall so that it doesn’t scan it. Here is how you can allow the World War 3 executable through Windows Firewall:
- Firstly, open Run using Win+R and then enter control firewall.cpl in it to open up the Windows Defender Firewall window.
- Now, click on the Allow an app or feature through Windows Defender Firewall option from the left-side panel.
- Next, press the Change settings button and scroll down through the list of programs to find out Steam and World War 3. If you don’t find these apps, click on the Allow another app button.
- After that, browse and add the executables for both Steam and World War 3.
- When done adding the programs, select them and turn on both the Private and Public checkboxes.
- Finally, reboot your PC and then try updating the game to check whether or not the error is fixed.
6] Reinstall World War 3
If none of the above solutions worked for you, you can try reinstalling the World War 3 game. There might be some corrupted files associated with the game that might be preventing the game updates. Hence, you can uninstall the game on Steam and then install its latest version. This method might work for you if nothing else did.
What causes World War 3 Fetching Data Timeout error?
World War 3 Fetching Data Timeout error can be caused due to the in-game overlay feature. Another cause of the same error can be the corrupted installation of the World War 3 game.
How do I fix World War 3 SERVERATTACHED TIMEOUT error?
To fix the SERVERATTACHED TIMEOUT error on World War 3, make sure the server status is up and running. Apart from that, you can try whitelisting the World War 3 game through your firewall or forwarding the ports used by World War 3.
Now read: World War 3 crashes after loading map on Windows 11/10.
— Update: 08-02-2023 — us.suanoncolosence.com found an additional article World War 3 Fails to Update? Here’s the FIX from the website appuals.com for the keyword fix failed to update the world war 3 game error.
Some World War 3 players are reporting that despite the fact that a new update is available for the game, any attempt at installing it results in the ‘Failed to update the World War 3 game‘ error. This issue seems to occur on every recent Windows version (Windows 7, Windows 8.1, Windows 10, and Windows 11).
After investigating this particular issue, it turns out that there are several different underlying scenarios that might ultimately cause this problem with World War 3. Here’s a list of culprits that are most likely responsible for preventing you from installing a World War 3 pending update:
- How to Reduce CPU Usage in Firefox
- How to Tweak ClearType in Windows for Better Screen Readability
- Top 8 Ways to Fix Mail and Calendar Not Working on Windows 11
- How to Delete Your Phone Contacts from Facebook
- How To Create Fillable PDF Forms With LibreOffice Writer
1. Free up disk space
As it turns out, the number one cause why you might expect to deal with this issue is a scenario that prevents the game’s updating function from copying over the new update failed due to lack of free space.
So if you’re currently dealing with the ‘Failed to update the World War 3 game’ error, the ideal way to start is to make sure you have sufficient disk space on the partition where the main World War 3 game is installed.
Some community members are recommending at least 10 GB of free space when installing pending updates, but our recommendation is to keep always keep a buffer of at least 35 GB of free space on the partition where you installed World War 3.
In order to free up space (if this method is applicable), you can either do it manually (by deleting stuff yourself) or automatically (via the Windows Cleanup Utility).
If you want to save time and ensure that you are not deleting stuff that’s actually valuable to your OS, we recommend the automated approach – it’s much easier to perform and will save you from mistakenly deleting files that you shouldn’t delete.
In the event that the partition in question currently holds other large games or applications that you’re no longer using, you should prioritize them first when uninstalling.
However, if you’re looking for specific instructions that will walk you through the process of using the Disk Cleanup utility to free up the required space for World War 3 (and the game is installed on the system partition), follow the guide below to learn how to use the Disk Cleanup utility to free up system space:
- Start by pressing Windows key + R to open up a Run dialog box.
- Once you see the Run dialog box, use the text box to type ‘cleanmgr’ inside the text box and press Enter to open up the Disk Cleanup utility.
- If you see the User Account Control (UAC) prompt, use your mouse to click Yes in order to grant admin access.
- Once you’re finally inside the Disk Cleanup menu, select the drive that holds your World War 3 installation.
Note: If World War 3 is installed on the Windows drive, look for the Windows logo.
- From the next menu of the Disk Cleanup utility, start by checking the following boxes while leaving everything else unchecked:
Downloaded Program Files Temporary Internet Files Recycle Bin Temporary Files
- Once you select everything mentioned above, click on Clean up system files and click Yes at the User Account Control prompt.
- After the Disk Cleanup scan is finally complete hit Ok to save the changes.
- Finally, after you manage to use this method to free up 35+ Gb of free space, reboot your PC and wait for the next startup to complete.
- Attempt to install the pending World War 3 update once again and see if you are now able to install it all the way through without seeing the same ‘Failed to update the World War 3 game’ error.
If this method didn’t help and you concluded that the WW3 error has nothing to do with the available free space, move down to the next potential fix below.
2. Open Steam with admin access
Once you made sure that you have enough space to accommodate the pending update, the next thing you should look at is the allowed privileges.
Steam needs administrator access in order to be able to replace and write new files onto the existing World War 3 installation. If Steam is not opened with admin access, you might find yourself in a scenario where every pending update will fail (not just for World War 3).
If you’re not sure whether Steam runs with admin access or not, follow the instructions below to check and ensure that admin access is given every time Steam is launched:
- Make sure that Steam is closed and not running in the background.
- Right-click on Steam, then choose Run as administrator from the context menu that just appeared.
- Now that you’re certain Steam runs with administrative privileges, launch World War 3 and see if the update installs without issue.
- In case the same kind of issue is no longer occurring, you’ve fixed the problem, but you still need to make this behavior permanent.
- To do this, right-click on the Steam icon and click on Properties from the context menu.
- Inside the Properties screen of Steam, go to the Compatibility tab using the horizontal ribbon at the top.
- Move down to the Settings section and check the box associated with Run this program as administrator.
- Finally, click on Apply to save the changes, then launch World War 3 once again and see if the problem is now fixed.
In case Steam was already running with admin access or this method didn’t fix the problem, move down to the next potential fix below.
3. Install every pending Windows Update
As it turns out, another fairly common scenario that might prevent World War 3 from auto-updating itself is a missing .NET dependency. This issue is solely reported on Windows 11 where a specific .NET dependency that the game needs is labeled as an optional update and won’t get installed automatically.
If you find yourself in this scenario, you should be able to get the issue fixed and allow World War 3 to install every pending update by installing every pending update that’s currently available via Windows Update.
Note: Make sure you install every critical, cumulative, and optional update that is currently pending.
For specific instructions on how to do this, follow the steps below:
- Open up a Run dialog box by pressing Windows key + R.
- Inside the text box, type ‘ms-settings:windowsupdate’ and press Enter to open up the Windows Update page of the Settings menu.
- Inside the Windows Update screen, move over to the right-hand side menu and click on Check for Updates to see if any new Windows 11 updates are available.
- After the initial scan is complete, check the results and see if a new update is available.
- If any new ones are available, click on Download now, then wait until they’re downloaded and click on Install Now (in case the installation doesn’t start automatically).
- Wait until every available Windows 11 is installed, then reboot your PC when asked to do so.
Note: If you have a lot of pending updates waiting to be installed, you might be prompted to restart your PC before every update is installed. Do as instructed if this happens, but make sure to return to this screen and complete the installation of the remaining updates after the next startup is complete.
- After every available update is installed and you manage to bring your Windows 11 build to the latest, launch Steam once again and run World War 3 to see if the pending game update installs without an error this one around.
If the ‘Failed to update the World War 3 game‘ error is still occurring, move down to the next potential fix below.
4. Create a new Windows administrative account
An unlikely but definitely possible culprit that might prevent World War 3 from updating itself is a scenario in which the main Windows account that you’re using when launching steam is somehow affected by corruption.
Several users dealing with the same kind of issue have confirmed that they finally fixed the problem by creating a new administrator account in order to replace the corrupted equivalent.
After doing this, a lot of affected users have confirmed that World War 3 finally completed the pending update and they could play the game normally.
If this scenario is applicable and you want to give this fix a try, follow the instructions below to create a new Windows administrative account to replace your current one:
- Start by pressing Windows key + I to open up the Settings app on Windows 11.
- Inside the Settings menu, access the side menu by clicking on the action button in the top-left corner of the screen.
- Next, from the sideline menu that just appeared, click on Accounts from the list of available options.
- Inside the Accounts tab, move over to the right-hand side menu and click on Family & other users.
- Inside the Family & other users tab, go under Other users (from the same right-hand side menu) and click on the Add account button.
- Next, click on the I don’t have this person’s sign-in information hyperlink under the box where you can input the email.
- Install any Windows desktop gadget in Windows 8.x with 8GadgetPack
- Fix: Camera Is Not Compatible With Windows Hello Face
- How To Fix the “API-Ms-Win-Crt-Runtime-l1-1-0.dll Missing” Error in Windows
- Could Not Complete Install an Update Service Shutting Down [Fix]
- How to Transpose Excel Columns to Rows
Next, click on Add a user without a Microsoft account and wait for the next screen to load.
- From the Create a user for this PC page, start by entering the Local account username and add a password if you want to add an extra security layer.
- Once the new local account is named and a password is added, hit the Next button and wait until the account is initialized.
- Click Next one more time to finish the creation of the local account.
- The newly created local account will become visible under Other users (inside the Family & Other users tab).
- Finally, reboot your computer and sign in to the newly created Windows account.
- Launch World War 3 once again and see if the pending game update installs just fine this time around.
If the problem is still not fixed, move down to the next potential fix below.
5. Deploy an integrity check in Steam
If none of the potential fixes so far have proven to be effective for you, you should start troubleshooting for some time of corruption that is preventing World War 3 from updating itself.
WW3 game file corruption typically appeared after a botched update or after some type of AV scan that ended up flagging one or more game files due to a false positive.
Almost every scenario like the one described above can actually be rectified by deploying a file integrity check on World War 3 from the Steam menus.
If you haven’t tried this potential fix yet, here’s what you need to do:
- Open your Steam client and make sure you are signed in with the same account that holds ownership to World War 3.
- From the main Steam dashboard, click on Library from the menu at the top.
- From the list of games, locate World War 3 and right-click on it from the menu on the left.
- Once you see the World War 3 context menu appearing, choose Properties.
- Inside the Properties screen, go ahead and click on Local Files.
- From the next menu, click on Verify the Integrity of Game Cache.
- At the next prompt, click Yes and wait for the operation to complete.
Note: In case the scan will manage to find inconsistencies with the game files, follow the on-screen instructions to repair the game before restarting your computer.
- After the integrity check procedure is finished via Steam, launch World War 3 once again and see if you are now able to install the pending updates.
If the problem is still not fixed, move down to the next potential fix below.
6. Prevent Firewall from blocking the game update
If none of the methods covered so far have proven to be effective in your case and you still can’t update World War 3 to the latest version available, you should also consider a potential firewall interference.
According to other community members, this type of problem is encountered with both the built-in firewall solution (Windows Firewall) and a 3rd party equivalent.
If this problem is indeed caused by a firewall action, the focused approach is to whitelist the game launcher (Steam) and the main World War 3 executable from your AV settings.
Note: In the event that whitelisting is not an option for you, the only way to prevent the firewall rules from being enforced is to simply uninstall the security suite that’s causing this problem.
Try going for the whitelisting method first and only resort to uninstalling the problematic security suite if there’s no other way. In any case, we covered both scenarios with a couple of sub-guides:
Whitelist Steam + the Main WW3 Executable
If this method is applicable to you and you’re experiencing this problem while using the built-in firewall, the most elegant way of solving the conflict is to whitelist Steam and World War 3 from the setting menu of Windows Firewall:
Note: In case you are using a 3rd party firewall instead of a Windows Firewall, the steps below won’t be applicable. In this case, look online for specific steps on whitelisting the two executables according to the firewall solution you’re using.
Here’s what you need to to do whitelist Stream and the main World War 3 executable:
- Press Windows key + R to open up a Run dialog box.
- Type ”control firewall.cpl” and press Enter to open up the standard menu of Windows Firewall.
- In the Windows Defender Firewall menu, move to the left-hand side click on Allow an app or feature through Windows Defender Firewall.
- From the next screen, click on Change settings button and allow admin access by clicking Yes at the UAC (User Account Control) prompt.
- Move down through the list of programs and see if you can locate Steam or the WW3 executable.
- In case they’re missing, click the Allow another app button, then click Browse, navigate to their location, and add the two entries manually by clicking Add.
- Once you’ve ensured that both entries (Steam + the World War 3 executable) appear inside the list of Allowed apps and features, check both the Private and Public boxes.
- After you enforce these modifications, reboot your PC before launching World War 3 once again and see if you’re still dealing with the same kind of problem.
Uninstall the overprotective 3rd party firewall
In case whitelisting the Steam executable and the game launcher was not an option for you, the next thing you can do is uninstall the overprotective firewall solution.
Keep in mind that even if you disable the firewall solution that you’re using, the same security rules will likely remain in place and prevent World War 3 from communicating with the game server.
Note: In case you are using Windows Firewall, you won’t be able to uninstall the firewall solution like you would normally do with a non-native firewall. Instead, follow this guide to disable Windows Security.
On the other hand, if you’re actually using a 3rd party firewall solution, follow the instructions below to uninstall the firewall solution:
- Open a Run dialog box by pressing Windows key + R.
- Type ‘appwiz.cpl’ inside the text box and press Enter to open up the Programs and Features screen.
- From the Programs and Features menu, move to the left and scroll down through the list of installed programs.
- From that list, locate the 3rd party AV that you’re trying to uninstall.
- Right-click on its entry and choose to Uninstall from the newly appeared context menu.
- Once you’re inside the uninstallation screen, follow the on-screen prompts to complete the uninstallation process.
- After the uninstallation operation is complete, open Steam yet again and launch World War 3 and see if the problem is now resolved.
If World War 3 still refuses to update, move down to the next potential fix below.
7. Reinstall World War 3
In case you got this far and nothing has really worked in allowing you to install the pending World War 3 update, there’s really nothing else you can do other than deploying a reinstall procedure.
We’ve managed to identify several community members confirming that once they uninstalled the game via Programs and Features and reinstall the latest build via Steam.
This will eliminate the need to update since you’re already installing the latest available update along with the main game.
Here’s what you need to do to reinstall the game:
- Open a dialog box by pressing Windows key + R on your keyboard.
- Next, type ‘appwiz.cpl’ and press Enter to open up the Programs and Features window.
- In the Programs and Features screen, scroll down through the list of applications, and locate your Steam installation.
- After you see the entry associated with Steam, right-click on its entry and choose Uninstall from the newly appeared context menu.
- If you get the User Account Control (UAC), click Yes to grant admin access.
- Next, click Uninstall to confirm the operation, then wait for the operation to complete.
- Once the main Steam installation has been successfully uninstalled, go ahead and repeat the uninstallation procedure with World War 3.
- Once both the launcher Steam and the game have been removed, restart your computer and wait for the next startup to complete.
- Finally, visit the official download page of Steam and install the latest available launcher build.
- After Steam gets reinstalled, use it to reinstall World War 3 from your Library.
- Launch the game once again and you should no longer see the ‘Failed to update the World War 3 game‘ error.