When you start your computer, a blue screen might appear with a message. It may show:
“Recovery
Your PC needs to be repaired.
The Boot Configuration Data file is missing some required information.
File:EFIMicrosoftBootBCD
Error Code: 0xc000014c
You’ll need to use recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.”
This BSOD error completely locks the system, and until the problem is fixed, your computer will not boot. In the meantime, all unsaved data will be removed. Error code 0xc000014c is a common problem and can occur in Windows 10/11/8.1/8 and Windows 7. In this article, we will deal with how to fix error code 0xc000014c in Windows 10/11 and how to recover the lost data.
Part 1: What Causes the 0xc000014c Error?
Several problems can cause the “error code: 0xc000014c” on your computer. They can be as follows:
- Corrupted System Files: Malware, damaged and corrupted system files can cause Error code 0xc000014c.
- Inconsistency of System Files: When the computer turns off suddenly amidst of writing important data to the boot sector, the error code 0xc000014c might occur.
- Corrupted or Missing BCD: This error can occur due to power outages, disk write errors, boot sector viruses, and if an error occurs while manually configuring the BCD. Missing or corrupted BCD is the most common cause for this error to occur.
- Newly Installed Hardware: Any newly installed hardware can cause this error if that is not compatible with the computer.
- Bad Sectors: Bad sectors on the hard drive can occur if your PC was improperly turned off. This can cause this error to occur.
Part 2: How to Fix Error Code 0xc000014c in Windows?
If you are aware of the reason behind the error, it will be easier for you to solve the problem. With these solutions, you can fix error code 0xc000014c Windows 10/11 no disc.
Solution 1: Remove the Recently Installed Hardware
If a newly installed hardware is not compatible with the system, this error might occur. In this case, you have to remove the incompatible hardware. After you have removed it, restart your computer.
Solution 2: Boot to Last Known Good Configuration
If you install or uninstall an application, that might affect the system configuration. In this case, try the last known good configuration to fix the error code 0xc000014c and other errors. To perform this, follow the given steps.
Step 1: At first, you may double-boot your PC to open the “Windows Recovery Environment” page.
Step 2: In the “Choose an Option” menu, you may click on the “Troubleshoot” option.
Step 3: Then, you may click on the “Advanced Options.”
Step 4: Now, you may click on “System Restore.”
Step 5: And then click on “Next” and there will be a list of options. You can now choose the last known good configuration.
Step 6: Lastly, click on “Close” and confirm it with “Next”. Complete the process by clicking on “Finish”.
Thus, you can troubleshoot the problem you are facing. Safe Mode, in Windows 10/11, works as the alternative of the “Last Known Good Configuration.”
Solution 3: Rebuild Bootable Configuration Data
Power outages and improper power off of the PC can damage the Bootable Configuration Data (BCD). To rebuild the BCD to fix this error, create Windows Media Installation first. Once the installation is done, you can rebuild BCD with the following steps.
- How to Factory Reset from BIOS on a Windows PC [Methods in 2023]
- Discord Can’t Unmute? – Resolve It Quickly and Easily [Partition Magic]
- 5 Easy Ways to Fix Windows Update Error 0x80070422
- FIX: STATUS BREAKPOINT error on Chrome or Edge. (Solved)
- How to Fix “Aw, Snap! STATUS_ACCESS_VIOLATION” Error on Chrome & Edge
Read more:
Step 1: Now, you may click on the “Repair your computer” option, and then, go to the “Advanced Options” tab from “Troubleshoot.”
Step 2: Open the “Command Prompt” tab.
Step 3: Enter the commands and press “Enter” after each word:
- bootrec /fixmbr
- bootrec /fixboot
- bootrec /scanos
- bootrec /rebuildbcd
Step 4: Exit and restart your computer. This will solve the error code 0xc000014c in Windows 10/11 problem.
Solution 4: Check the Disk for Possible Corruption
To check the disk for any corruption, follow the given steps.
Step 1: You may connect the Windows Installation Media drive to the computer and boot it from the bootable media. Click on “Repair Your Computer.”
Step 2: You may choose “Troubleshoot,” and then, “Advanced Options” and “Command Prompt.”
Step 3: Write “chkdsk C: /f /x /r” and press the “Enter” button.
After the completion of the task, restart the computer. This will check for possible corruption and repair it.
Solution 5: Use System File Checker (SFC) Tool to Fix the Error 0xc000014c
You may use System File Checker if the error code 0xc000014c has occurred due to corrupted files.
Step 1: After you boot the Windows Installation Media drive to the computer, you may click on “Repair Your Computer.”
Step 2: Choose “Advanced Options” from “Troubleshoot” and select the Command prompt from there.
Step 3: Write “sfc /scannow” and press the “Enter” button. You have to wait until the process is finished.
- 8 ways to speed up your Google Chrome browser
- Invoice Expert Lite invoicing software review
- Fix Hello PIN Error 0x80090011 on Windows 11/10
- 8 Ways to Fix Desktop Shortcuts That Aren’t Working
- Logitech Unifying Receiver Not Recognized in Windows 10
Read more:
Step 4: Restart your computer and make sure the error code 0xc000014c is solved.
Solution 6: Restore the Default and Uncorrupt Registry Values
This process involves taking out your hard drive (the drive which is unable to boot) and installing it repeatedly.
Step 1: Take the problematic hard drive out.
Step 2: You need another computer with a properly running hard drive. Connect the problematic hard drive with this second computer.
Step 3: You may boot the second computer with its good hard drive (second hard drive). So the first hard drive will operate as a secondary storage unit.
Step 4: Go to “C:WindowsSystem32configRegBack” in the second hard drive and copy all files. Paste them in the same location in the first hard drive.
Step 5: Once it is done, shut down this computer and disconnect the first hard drive. Then, connect this hard drive with the targeted computer.
Step 6: Start the targeted computer and make sure the problem is solved.
Part 3: How to Recover Unsaved Data due to Error Code 0xc000014c?
If you have lost unsaved data due to the error code: 0xc000014c, Recoverit will help you with this. Recoverit comes to put an end to your worries. It can restore more than a thousand types of files, including FAT, APFS, NTFS, and so on. Besides, it will not change anything in your lost data. It is a high-tech data recovery tool that can help you recover your data from any storage device. Besides, it will take only a few steps to get the data you have lost.
Step 1: Select a location:
Launch the Recoverit tool on your computer, you need to select a location from where you think you have lost the data. You may choose a hard disk drive or “Desktop.” And then, click on the “Start” option to run the scan.
Step 2: Scan the Location
The program will start the scanning of the chosen location. While it is scanning, you may select and pinpoint the files you want while scanning.
- To do that, you have to choose the ‘File Path,” and then, the “File Type.” Use the “Search Filter” in the right corner, if you need it.
- If you have found the file in the middle of scanning, you can pause and stop scanning. In this case, you have to click, respectively, the “Pause” and “Stop” button.
Step 3: Preview and Save Files
- To preview data, click on the file. A thumbnail will show at the right-hand side. You may click on the “Preview” option to preview the file itself.
- You can preview photo, video, audio files, PowerPoint file, Word file, Excel file, Pdf file, etc.
- You have to confirm the files to recover it. Now, you may click on the “Recover” button. Select a path (except the path from where you lost the data) to save the files.
Tutorial Guide about How to Fix Error Code 0xc00000f on Windows
The Bottom Line
Error code 0xc000014c is a common problem reported by the users. You can get rid of this problem by following these steps. Besides, you can recover the lost data with the help of Recoverit software. It is highly rated by users. You can easily download it from Wondershare’s website to get it for your PC.
Source: https://recoverit.wondershare.com/computer-problems/fix-windows-10-error-code-0xc000014c.html